amorphous state

英 [əˈmɔːfəs steɪt] 美 [əˈmɔːrfəs steɪt]

非晶态;无定形态

化学



双语例句

  1. The iron and magnesium phase mostly appeared white amorphous state and was continuously spread in blank phase and gray phase.
    铁镁相多数呈现白色无定形状,连续延伸于黑色相与灰色相中;
  2. Analysis of the mechanical behavior of polymer in an amorphous state under uniaxial extension condition through atomistic modeling
    原子模型分析无定型聚合物在单轴拉伸下的机械行为
  3. Moreover, adding carbon nanotubes not only improves the degree of crystallization for the composite deposit but also helps their transformation from the amorphous state to the nanocrystal state.
    此外,纳米碳管的加入,使镀层由非晶变成了纳米晶,促进了复合镀层的晶化。
  4. The relationship was studied among the formation condition of the amorphous state and the surface hardness, abrasion and corrosion, and the heat endurance of the amorphous state was tested.
    研究激光形成非晶态的工艺条件与其表面硬度以及磨蚀及腐蚀的关系,并对非晶层的热稳定性进行测试。
  5. Developments of solder alloys in the world such as no poison, low cost, high property, high reliability, low melt temperature and amorphous state are introduced.
    就目前国内外钎料合金的无毒化、低成本、高性能、高可靠性以及低熔性、非晶态等发展状况作了介绍。
  6. In this PCM, polyethylene glycol ( PEG) has been taken as functional branches, with which the energy storage and energy release can be proceeded by phase transition between its crystal state and amorphous state.
    利用聚乙二醇从结晶态到无定形态之间的转变,实现该材料的储能和释能,整个过程中材料始终保持为固体。
  7. The colloidal coating solution of amorphous state was prepared via metal alkoxides of TiO2 and SiO2 producing hydrolysis in alcoholic solution.
    采用TiO2和SiO2的金属烃氧基在乙醇溶液中进行水解反应,制成胶状非晶态物质溶液。
  8. Structure and Crystallization for the Amorphous State of Ni-Mo-P Coating
    非晶态Ni-Mo-P镀层的组织结构与晶化过程
  9. The reasons of solubility increased were the crystal structure of maize starch being destroyed by mechanical and the crystallinity decreased from polycrystalline to amorphous state.
    玉米淀粉溶解度提高的原因是由于机械活化使得淀粉颗粒结晶结构受到破坏,结晶程度降低,最终由多晶态转变成非晶态。
  10. The process that the film was transformed from amorphous state to the polycrystalline structure has been determined by the DTA-TG technique.
    通过DTA-TG对薄膜从凝胶态向结晶态的转化过程进行了测定和分析;
  11. Amorphous materials mainly include oxide glasses, macromolecule polymers, semiconductors in amorphous state and metallic glasses.
    非晶态材料主要包括氧化物玻璃、高分子聚合物、非晶态半导体以及金属玻璃(非晶合金)。
  12. Results show that the A. V.passive film is a highly disordered amorphous state.
    结果表明,载波钝化膜是一高度无序的非晶态半导体膜且具有p型半导体特性。
  13. X-ray Diffraction reveals that the sample is in an amorphous state.
    X射线衍射检测证明样品完全为非晶态。
  14. We also discuss in detail the relation between heat treatment technology, phase structures, optical spectroscopic properties with apparent crackle, crystalline state and amorphous state etc.
    讨论了PLZT铁电薄膜的热处理工艺条件、结构特性、光谱特性与材料的表观裂纹、晶态与非晶态之间的关系。
  15. X-ray diffraction proves that the high concentration of KOH in the electrolyte is in an amorphous state.
    X射线衍射显示PVA和KOH在聚合物电解质中均以非晶态存在。
  16. Molecular dynamics simulations of diffusion properties of Cu in supercooled liquid and amorphous state
    过冷及非晶态Cu扩散性质的分子动力学模拟
  17. Nanocrystalline materials is a new kind of polycrystalline materials with nanometer-siged grains and gas-like structure of the interfaces between the grains neither like crystalline state with long range order nor like amorphous state with short range order.
    纳米微晶材料是纳米量级晶粒所构成的多晶物质,其晶界区域中存在与长程有序晶态和短程有序非晶态结构不相同的气体状的结构。
  18. The as-deposit microstructure of electroless Ni-P plating is amorphous state, and will be transformed to crystalline state after heat treatment while the hardness of plating is improved.
    而在化学复合镀Ni-P-碳纤维过程中,搅拌方式起到关键作用。化学镀Ni-P镀层在镀态下为非晶态,经过一定的热处理后转变为晶态,同时镀层的硬度提高;
  19. Studies on the amorphous state formation effect of boron ion implantation into polycrystalline iron thin films
    硼离子注入多晶铁薄膜的非晶化作用的研究
  20. Transportation properties of amorphous state InSb and its metastable middle phase
    非晶态和亚稳中间相InSb的输运性质
  21. Study on the Electroless Plating Ni-P Amorphous State in Engineering Application
    化学镀Ni-P非晶态合金工程化应用
  22. We discuss some of the fundamental problems concerning amorphous state physics and review last developments as well as the current status of production of amorphous soft magnetic materials.
    文章综述了非晶态物理方面的一些基本问题,以及非晶软磁合金的发展历程和产业化现状.指出了我国安全生产面临的主要难点;
  23. Effect of high pressure on the formation of amorphous state
    高压对形成非晶态的影响
  24. The results are presented as follows: 1. PAA is a kind of amorphous state polymer, there are long carbon chains& carboxylic groups exist in the molecule.
    获得的主要成果与结论如下:1.PAA是一种无定形态高分子聚合物,其分子结构中含有碳长链结构和羧基官能团。
  25. XRD results showed that the crystalline drug was converted into the amorphous state in both kinds of meshes.
    XRD结果说明,在这两种纤维膜中,药物均失去了原有晶体结构,以无定型状态分散于高聚物中。
  26. XRD analysis revealed that the coating contained 30% crystallized nickel. The remaining were amorphous state because of excessive P elements dissolved in nickel. There was a little amount of Ni ( OH) 2 as well.
    XRD分析表明涂层包含有30%左右的晶体镍,其余镍由于溶解过量的P而呈非晶状态,此外还含有少量的Ni(OH)2。
  27. At last, the Al-based metallic glass thin films show little resistivity difference between amorphous state and crystalline state.
    但是,Al基金属玻璃薄膜的电阻率在晶态与非晶态之间差异不大。